| Step | | Procedure & Parts & Tools |
| 1 |
|
TURN THE MACHINE ON AND PUSH THE BRUSH BUTTON TO LOWER THE BRUSH DECK. TURN MACHINE OFF.
|
| 2 |
|
SLIDE THE BRUSH OUT FROM BRUSH DECK.
|
| 3 |
|
REMOVE THE 5 SCREWS HOLDING THE BRUSH DECK COVER.
| Wrench-Allen metric 5.0mm |
|
|
| 4 |
|
REMOVE THE SCREW FROM THE BUMPER WHEEL.
| Wrench-Allen metric 5.0mm |
|
|
| 5 |
|
SLIDE THE BRUSH COVER FROM BRUSH DECK.
|
| 6 |
|
NOTE: THE BRUSH DECK HAS BEEN REMOVED FROM THE MACHINE FOR ILLUSTRATION PURPOSES ONLY. YOU WILL NOT NEED TO REMOVE THE BRUSH DECK. LOCATE THE BRUSH MOTOR ON BRUSH DECK. TURN PULLEY WITH ATTACHED BELT. IF PULLEY MOVES FREELY, THE BRUSH MOTOR IS NOT LOCKED UP. REPEAT STEPS 1 THRU 6 TO CHECK OTHER BRUSH MOTOR.
|